Specifications
Interface | |
---|---|
LAN Port | 1x 2.5G/1G/100M/10M Ethernet, RJ-45 (PoE-PD Support) |
Antenna | 4x Internal PIFA Single-Band (2.4G) 4x Internal PIFA Single-Band (5G) Gain: 5.1 dBi for 5GHz, 5 dBi for 2.4GHz1x Internal PCB DB (for scanning radio) Gain: 5.8 dBi for 5GHz, 4.3 dBi for 2.4GHz |
Button | 1x Factory Reset Button |
DC Power Jack | 1 |
Security Lock | 1 |
Capacity | |
---|---|
2.4GHz Peak Speed | 1200 Mbps |
5GHz Peak Speed | 2400 Mbps |
Max. Concurrent Active Users | 256 (128 per band) |
WLAN | |
---|---|
2.4GHz Standard | IEEE 802.11b/g/n/ax 4×4 MIMO |
5GHz Standard | IEEE 802.11a/n/ac Wave 2/ax 4×4 MU-MIMO |
Operating Mode | AP, Mesh Root, Mesh Node, Range Extender |
Roaming | AP-Assisted Roaming, PMK-Caching, Pre-Authentication, 802.11 |
AirTime Fairness | |
Band Steering | |
Auto Channel Selection | |
Max. Number of SSIDs | 16 (8 per radio band) |
WDS | |
Client Number Limit | Per band, Per SSID |
Connection Time Control | |
WMM |
Security | |
---|---|
Security Mode | WPA3, WPA3/WPA2, WPA2, WPA2/WPA, OWE, WPA, WEP, None |
Authentication | Personal, Enterprise |
WPS | PIN, PBC |
Hidden SSIDs | |
MAC Address Filter | Up to 256 entries |
Wireless Client Isolation | |
Mobile Device Management |
Application | |
---|---|
Built-in RADIUS Server | |
RADIUS Proxy | PEAP, EAP-TLS |
Hotspot Web Portal | |
DHCP | DHCP Server, DHCP, Client, DHCP Relay Agent |
Static IP | |
MAC Clone | |
802.1q VLAN | |
Schedule | Auto-Reboot, Wi-Fi Up/Down, LED On/Off |
Management | |
---|---|
Local Service | HTTP, HTTPS, Telnet |
Configuration | Stand Alone, TR-069 (VigorACS), VigorRouter APM, VigorAP Mesh Root |
Firmware Upgrade | HTTP, TFTP, TR-069 |
Tools | Speed Test, AP Discovery, Statistics, Interference Monitor |
Configuration Backup and Restore | |
Syslog | |
Mail Alert | |
SNMP | v1, v2c, v3 |
Managed by VigorConnect | |
Managed by VigorACS | |
Central AP Management | 50 VigorAPs |
Notes:
- All specifications are subject to change without notice.
- The throughput figures are maximum, based on DrayTek internal testing with optimal conditions. The actual performance may vary depending on the different network conditions and applications activated.